Hot Acrylic Electric Folding Machine Double and PVC Plastic Bending Machine, Portable, Manual, 1 to 6 Mm, for Labeling ~/

Instructions for acrylic folding:MGA a cooling water tank (bucket) with capacity greater than 30 liters.First, connect the radiator and submersible pump with a silica gel tube.Place the submersible pump in the cooling bucket, connect the pump to the current and wait for the water to.(Note: The water temperature of the machine will continue to rise for a long time. Replace cold water carefully. The water temperature should not suddenly drop. If the water temperature exceeds 50 degrees, cut the electric supply of the heater in time and replace the water before).(Note: It is recommended to slowly adjust the thermostat until the heat tube is reddish. If the temperature is too high, the material to be folded will be damaged and the useful life of the bendingness will be affected).Specs:Maximum heating head: ZW-300 420 ℃, another 250 ℃.Heating elbow thickness: 1 mm-6 mmWidth of the heating interface: 30-240 cmPower: 30 cm/300 w, 60 cm/800 w, 125 cm/1500 wSize: 30 cm/60 cm/125 cmGross weight: 30 cm/2.8 kg, 60 cm/3.05 kg, 125 cm/4.3 kgRecommended temperatures for some common materials:Acrylic: 210 ° C.Fluorite: 195 ° C.PVC sheet: 155 ° CABS: 190 ° C.PET: 160 ° C.Packaging list:1 heater for acrylic and PVC bent1 water pump2 silica gel tubes1 temperature controller1 water thermometerSecurity precautions:1. Heating the product will generate high temperatures.The heating element must avoid skin contact.2. Pay attention to the use environment and keep it away from flammable and explosive materials.If you do not use it for a long time, bring it to time.

• Acrylic folding machine with rapid cooling without deformation: PTC aluminum alloy thermal conductive plate;Antiating acrylic plate;There is water action cooling on both sides of the heating tube to ensure that there will be no thermal deformation except where heating is needed.
• Functions and purposes: To bend, soften and shape various plastic materials, it can process acrylic, plastic, PVC, organic glass and other materials.Widely used in decoration engineering, manufacture of signs, showcases, lighting LED channel characters, supermarket shelves, curtain walls, etc.
• Adjustable temperature: The temperature is adjustable, it heats evenly and allows all kinds of plastic plates to be folded.It can be heated simultaneously with two heater.You can also combine several heater to heat several folding points simultaneously.If the acrylic material has a thickness greater than 6 mm (0.24 "), you can also use two heating strips to fold plastic to simultaneously heat the upper and lower part of the material.
• Easy to use: When folding thick plates, slots and corners, it can be used with flexibility according to local conditions.It can be combined with the work bank to form a hot doubles or use alone.It is easy to transport and save space to fold plastic sheets of different materials.
• Safe and practical: The power supply and the water pipe are connected at both ends.The separation of hydraulic food is safe and intuitive, easy to connect and disconnect, easy to collect and easy to assemble with the work bank.